How to Find Your Dell Laptop Model Number
You need your Dell laptop model number for almost every practical job that follows: finding the right driver, ordering a replacement battery or charger, checking warranty cover, or asking Dell support a question they can actually answer.
The trouble is that Dell prints the answer in several different places, and the number you find in one place does not always look like the number you find in another.
One screen may show “Inspiron 15 3520”, another may show only a seven character Service Tag, and a third may show a shorter code from the bottom label. All three can be correct, but they are not the same kind of identifier, and mixing them up is what sends people to the wrong driver page.
This guide covers every reliable way to find the model number, starting with the fastest and ending with the fallbacks for a worn label or a laptop that will not switch on.
Every method below is one Dell itself documents or that Windows itself provides, so you will not be guessing at a code or trusting a third party tool.
Quick Answer: Flip the laptop over and read the label on the bottom cover, where the model name sits next to the Service Tag. If the label is worn or hard to read, open SupportAssist on the laptop, where Dell shows the Service Tag in the top right corner and the model one click further in. If Windows will not start, restart and tap F2 at the Dell logo to read the model and Service Tag in the BIOS. As a last resort, enter the Service Tag at dell.com/support and Dell will show you the exact model.
What Is the Difference Between a Dell Model Number and a Service Tag?
Before you start searching, it helps to know which of the three codes on a Dell laptop you are actually looking for, because each one does a different job.
The model number, often called the model name, identifies the type of laptop you own. Examples are Inspiron 15 3520, XPS 13 9315, and Latitude 5420. If you are still deciding between those families, our comparison of Dell laptop lines explains what XPS, Inspiron and Latitude each stand for. Every laptop of that type shares the same model name, and it is the code you use to find manuals, specifications, and drivers for your machine.
The Service Tag is different. It is a unique seven character code of letters and numbers assigned to your one specific laptop, and Dell uses it in place of a serial number. No two Dell laptops share a Service Tag.
You need it for warranty checks, for support chats, and for the Dell support website, which can turn a Service Tag back into the exact model, configuration, and warranty status of your machine.
If you ever need to prove which laptop is yours, for example after a loss, the Service Tag is the identifier that matters, which is why our guide on how to track a laptop with a serial number starts from the same code.
The Express Service Code is simply a numeric version of the Service Tag, provided for phone support so that you can read it out digit by digit without confusing similar looking letters.
You will see it printed next to the Service Tag on the label, and you can use either code on the Dell support site.
One more distinction is worth making. Windows sometimes shows a device name, which is a name you or a previous owner gave the computer, not a model. A device name like DESKTOP-AB12CD tells you nothing about the hardware.
The fields that matter in Windows are System Model and System Manufacturer, and this guide shows you exactly where to find them.
| Your situation | Best method first | What you will get | Covered in |
|---|---|---|---|
| Laptop in your hands and switched on | Bottom label | Model name and Service Tag | Label section |
| Windows 11 running normally | Settings, System, About | Model name at the top of the screen | Windows Settings section |
| SupportAssist already installed | SupportAssist home screen | Service Tag, model one click away | SupportAssist section |
| You need the full system profile | System Information | System Model, Manufacturer, and SKU | System Information section |
| Windows will not start | BIOS setup with F2 | Model and Service Tag from firmware | BIOS section |
| Label worn out or laptop dead | Service Tag on Dell Support | Exact model from Dell’s own records | Service Tag section |

How Do I Find My Dell Laptop Model Number on the Label?
The bottom label is still the fastest method, and it is the one Dell lists first in its own support article. It works whether the laptop is switched on or off, and it gives you both the model name and the Service Tag in one place.
- Shut the laptop down and unplug the charger, then close the lid and turn the laptop over on a soft surface so you do not scratch the lid. If a lid is already marked, our guide to removing light scratches from an aluminum lid explains what can safely be softened at home.
- Look for a white or silver sticker on the bottom cover. On most Dell laptops it sits near the centre or toward the hinge edge, and it carries the Dell logo, a barcode, and several lines of small print.
- Find the line marked “Model” or “Model No.” and read the name next to it, for example Inspiron 15 3520 or XPS 13 9315. That is the model number you need for drivers and parts.
- On the same label, note the line marked “ST” or “Service Tag” and write the seven character code down too. You will need it for warranty checks and for the Dell support website, and it is much easier to copy now than when you are on the phone with support later.
- If the label also shows an Express Service Code, note that as well, although you will rarely need it outside a phone call.
A few Dell models hide the label in a less obvious place. On some Latitude models the model number is printed on the palm rest, just below the arrow keys, rather than only on the bottom.
On older Dell laptops with a removable battery, a second label can sit inside the battery compartment, so if the bottom label is damaged, remove the battery and check underneath it.
On some newer models the model is also printed in small text on the screen bezel, although this is usually a short code rather than the full model name, and you may need to search that code to confirm the full name.
If the print has rubbed away with use, do not guess from a partial code. The label is only one of several sources, and the methods below read the same information from the laptop’s firmware, where wear and tear cannot erase it.
How Do I Find My Dell Laptop Model Number in Windows Settings?
If your laptop runs Windows 11, the Settings app shows the model number right at the top of the System screen, and this is the quickest on screen method Dell documents.
- Press the Windows key and type “settings”, then open the Settings app from the results.
- Select System in the left hand menu, or stay on the Home screen. In Windows 11, the model number of the computer is shown across the top of the System screen, above the device name.
- Read the model name shown there and compare it with the label if you want to be sure. If the two disagree, trust the label and the BIOS over Settings, because Settings can show a marketing name that is less precise than the firmware record.
One limitation is worth knowing. Dell notes that this model listing is a Windows 11 feature and is not available in Windows 10 or earlier versions. On Windows 10, the About screen shows the device name, processor, and installed RAM, but it does not reliably show the model.
If you are on Windows 10, skip to the System Information method below instead of hunting through Settings for a field that is not there.
While you are in Settings, it is worth checking the Windows edition and version shown on the same screen, because driver downloads sometimes depend on whether you run Windows 11 Home or Pro.
You do not need to change anything here, but noting the edition now saves a second trip back when a driver page asks for it.
How Do I Find My Dell Laptop Model Number With SupportAssist?
Dell recommends that owners of home computers let the Dell support website detect the machine using SupportAssist, the application Dell preinstalls at the factory on most consumer laptops.
It is the method Dell puts first for a reason: it reads the model directly from the system, so there is no typing and no chance of misreading a worn label.
- Press the Windows key and type “SupportAssist”, then select SupportAssist from the search results to open the application.
- If SupportAssist does not appear in the results, it is not installed on your laptop. You can download it from the Dell support website, but the other methods in this guide are faster than installing an application for a one off lookup.
- On the SupportAssist home screen, look at the upper right corner, where the Service Tag of your computer is displayed.
- Select the Service Tag to open more product details, including the model number, among other information about your computer.
SupportAssist also has a practical side benefit. Because it already knows your exact model, it can check for driver and BIOS updates that apply to that model only, which is safer than downloading a driver for a similar sounding model from a general search.
Use it for updates if it is already installed, but do not install it only to find a model number when the label or System Information will give you the same answer in seconds.
How Do I Find My Dell Laptop Model Number in System Information?
The Windows System Information utility, msinfo32, is the most complete on screen source, and it is the method to use when you need more than the model name alone, such as the system SKU or the BIOS version for a support ticket.
- Press the Windows key and type “system information”, then select System Information from the search results.
- When the window opens, the System Summary page is shown by default. Look down the list for the entry called “System Model”. The value next to it is your Dell laptop model, for example XPS 13 9315.
- In the same list, check “System Manufacturer”, which should read Dell Inc., and “System SKU”, which is a further code Dell uses to identify the exact configuration. Note the SKU too if you are ordering parts, because two laptops with the same model name can ship with different configurations.
- If you need to send this information to support, use File and then Export in System Information to save the whole summary as a text file, rather than typing each field out by hand and risking a mistake.
System Information reads its values from the firmware, so it agrees with the BIOS in almost every case.
If it shows a blank or generic value for System Model, that points to a firmware record problem rather than a wrong method, and the BIOS check below is the next step, followed by the Service Tag lookup on Dell’s site.
How Do I Find My Dell Laptop Model Number in the BIOS?
The BIOS, or UEFI firmware, is the software that runs when you switch the laptop on, before Windows starts. Because it reads the model from the motherboard itself, it works even when Windows will not start, and it is the method Dell documents for exactly that situation.
- Start with the computer switched off, not asleep. If it is in sleep or hibernation, shut it down fully first, because a resume will skip the window for entering setup.
- Switch the computer on and, at the Dell logo screen, tap the F2 key several times. Do not hold it down, and do not wait for Windows to appear. If Windows starts, restart the computer and try again, tapping earlier.
- On the BIOS or UEFI menu, open the Overview tab. The Service Tag and the model number are shown there, in the same view.
- Write both values down, then select Exit to restart the laptop into Windows normally. Do not change any BIOS setting while you are in there, because an accidental change can stop the laptop from starting. If Windows does not come back on its own, see how to reboot a laptop.
If F2 does not seem to register, the cause is often timing rather than a fault, so try again and start tapping the moment you press the power button.
If the keyboard itself does not respond at the logo screen, that is a separate problem from finding the model, and our guide on how to unlock the keyboard on an Acer laptop covers the same kind of keyboard checks, such as testing an external keyboard, that apply whatever brand you own.
If F2 instead triggers a media shortcut, first see how to enable function keys on a Dell laptop.
The BIOS method is also the right answer when a laptop has been wiped or has had its drive replaced, because the model and Service Tag live in the firmware, not on the hard drive.
A factory reset or a new drive changes nothing in the BIOS record, which is one reason to note the model before any major change to the machine. If you are weighing that kind of change, it is worth knowing how long a factory reset takes first, so the job does not catch you out.
How Do I Find My Dell Laptop Model Number With Command Prompt or PowerShell?
If you prefer the keyboard to the mouse, or if you need the model for a script or a support chat, two commands read the same firmware values as System Information, without opening any window.
In PowerShell, the modern command is:
Get-CimInstance -ClassName Win32_ComputerSystemProduct
The Name field in the output is the model, and the IdentifyingNumber field is the Service Tag. A shorter version that shows only those two fields is:
Get-CimInstance -ClassName Win32_ComputerSystemProduct | Select-Object Name, IdentifyingNumber
In Command Prompt, the older command is:
wmic computersystem get model
That command shows the model name directly. To get the Service Tag as well, which Dell treats as the serial number, use:
wmic bios get serialnumber
Two cautions apply here. First, the older wmic tool has been deprecated in recent Windows versions and may not be present on a fully updated Windows 11 machine, so if Command Prompt reports that wmic is not recognised, use the PowerShell command instead. Second, copy the output rather than retyping it.
Service Tags mix letters and numbers that are easy to confuse, and a single wrong character will point Dell support at a different machine or at no machine at all.
These commands are also useful when you are helping someone else remotely. You can ask them to paste the output into a message, and you will have both the model and the Service Tag without asking them to open the laptop or find a label.
How Do I Find My Dell Laptop Model Number From the Service Tag?
If all you have is a Service Tag, perhaps from an old invoice, a support email, or a photograph of the label, Dell’s own website can turn it back into the full model, and this is the method to use when the laptop itself is not in front of you.
- Go to dell.com/support in any browser, on any device.
- In the “Identify your product or search support” box, type or paste the seven character Service Tag, or the numeric Express Service Code if that is what you have.
- Select Search. Dell will open the support page for that exact product, showing the model number, the original configuration, the warranty status, and the drivers and manuals for that machine.
- If you are on the Dell laptop itself, you can instead select Detect This PC on the same page and let SupportAssist read the Service Tag for you, which avoids typing entirely.
Dell notes that you can also scan the QR code or barcode printed on the service label with a phone, which opens the Dell support page for that product directly.
This is handy when the label text is small or worn but the barcode still scans, and it is the same trick the old image search method in earlier guides was trying to achieve, done through Dell’s own system instead of a general image search.
Once Dell shows you the model, save the support page link or write the model down in the same place you keep purchase records. The next time you need a driver, you will go straight to the right page instead of repeating this whole search.
What If the Label Is Worn Out or the Laptop Will Not Turn On?
A worn label is common on older Dell laptops, because the bottom cover takes the most contact with desks and bags. If the print is gone, work through the firmware methods in this order: SupportAssist if Windows runs, System Information if you want the full profile, and the BIOS if Windows does not run.
All three read from the motherboard, so label wear makes no difference to them.
If the laptop will not turn on at all, your options narrow to the physical evidence. Read the bottom label, check inside the battery compartment on models with a removable battery, and check the outside of the original shipping box, where Dell prints a label carrying both the Service Tag and the model number.
If you have the Service Tag from any of those places, the Dell support website method above will give you the model even though the laptop itself is dead.
If every label is gone and the laptop will not start, the remaining source is your own records: the original order email, the invoice, or a previous support chat, all of which normally quote the model or the Service Tag.
Dell support can also help if you can prove ownership, but they will ask for the Service Tag or the order details first, so gather whatever paperwork you have before contacting them.
One thing not to do is to trust a model guessed from a photograph search or from a similar looking laptop. Two Dell laptops can look identical and still be different models with different drivers, batteries, and chargers.
A wrong model can mean a battery that does not fit or a BIOS update written for different hardware, so it is worth the extra step of confirming the model from the firmware or from Dell’s own records.
How Do I Use the Model Number Once I Have Found It?
Finding the model is only half the job, and it is worth spending a minute using it properly, because the model unlocks the exact support Dell built for your machine.
First, use it on the Dell support website to check the warranty status and the original configuration. The configuration page lists the parts your laptop shipped with, which settles arguments about how much RAM or storage it has without opening it.
Second, use it for driver downloads. Always pick the driver page for your exact model rather than a general search result for a similar name, and check the operating system version the driver is written for. A driver for the right model but the wrong Windows version can still cause problems.
Third, use it when ordering parts. Batteries, chargers, screens, and keyboards are model specific, and sellers list compatibility by model name. Give the seller the full model name plus the Service Tag if they ask for it, because the Service Tag lets them confirm the exact configuration your laptop shipped with.
Finally, use the model when planning upgrades or accessories. For example, the ports and graphics capability of your exact model decide what a second monitor setup can do, so check our guide on how to connect two monitors with a laptop against your model’s own specifications before buying cables or a dock.
The model number is the key that makes every other specification search accurate, and that is why it is worth finding it properly once and writing it down somewhere safe. The same check matters for a processor change, because a processor upgrade depends on socket, chipset and BIOS support for that exact model.
Frequently Asked Questions
What is the fastest way to find my Dell laptop model number?
Check the label on the bottom cover of the laptop, where the model name sits next to the Service Tag. If the laptop is switched on and runs Windows 11, the Settings app shows the model at the top of the System screen, which is just as fast.
Is the Service Tag the same as the model number?
No. The model number identifies the type of laptop, such as Inspiron 15 3520, and every laptop of that type shares it. The Service Tag is a unique seven character code for your one specific laptop, and Dell uses it in place of a serial number for warranty and support.
Where is the Service Tag on a Dell laptop?
It is printed on the label on the bottom cover, next to the model name, and it also appears in SupportAssist, in the BIOS on the Overview tab, and in PowerShell through the Win32_ComputerSystemProduct record. On the Dell support website, entering the Service Tag opens the support page for your exact model.
Can I find the model number if Windows will not start?
Yes. Restart the laptop and tap F2 at the Dell logo to open the BIOS, where the model and Service Tag are shown on the Overview tab. If the laptop will not switch on at all, use the bottom label, the battery compartment label, or the label on the original shipping box, and then look the Service Tag up on the Dell support website.
Why does Windows show a different name from the label?
Windows Settings can show a marketing name, and the device name is a name given to the computer, not a hardware model. The reliable values are System Model in System Information and the model shown in the BIOS, and both should agree with the bottom label. If they disagree, trust the BIOS and the label.
The Verdict
Start with the bottom label, because it is fast, it works with the laptop switched off, and it gives you both the model name and the Service Tag at once.
If the label is worn or you are already at the keyboard, SupportAssist or System Information will give you the same answer from the firmware in under a minute, and the BIOS with F2 covers the case where Windows will not start at all.
Whatever method you use, write the model name and the Service Tag down together in one safe place, because the pair of them is what every driver page, parts seller, and support agent will ask for next, and finding them once properly means you will never have to search for them again.






