How To Turn On HP Laptop Without Power Button?

How to Turn On an HP Laptop Without the Power Button

A power button that stops working feels like a locked door, especially when an important file is on the other side of it. The honest answer is less simple than most short guides admit.

There is no single hidden key that powers on every HP laptop, and whether you can get back in depends on one crucial detail: is the laptop fully switched off, or is it only asleep? A sleeping laptop can often be woken with the lid, a keyboard key or a mouse.

A laptop that is fully shut down needs a method that was set up before the button failed, a docking station with its own power button, or a repair to the button itself.

This guide separates those two cases clearly, so you do not waste time on a sleep trick for a laptop that is truly off.

You will learn:

  • how to tell sleep from shutdown
  • how to wake a sleeping HP laptop without touching the power button
  • how to set up lid open power on and Wake on LAN while the laptop still works
  • what to try when the button has already failed
  • when to stop trying home fixes and get the button repaired

It also explains the motherboard pin method you may have seen online, and why it belongs in a repair shop rather than in a first attempt at home.

Everything here is based on HP BIOS menus and Windows power settings as HP documents them, with model differences flagged where they matter, because HP does not use identical BIOS options on Pavilion, ENVY, OMEN, EliteBook and ProBook laptops.

Quick Answer: If the laptop is asleep, open the lid, press a key, or move a wake enabled mouse to wake it. If it is fully off, the reliable button free methods are Power On When Lid is Opened and Wake on LAN, but both must be switched on in BIOS and Windows before the button fails. If neither was set up, try a compatible docking station power button, or keep the laptop in sleep rather than shutting it down once you get it running, and book a power button repair. Do not short motherboard pins with a screwdriver as a casual fix, because a wrong pin can damage the board.

Which Button Free Method Should I Try First?

Use the table below to pick the method that fits your situation, rather than trying every idea in random order. The key distinction is whether the laptop is asleep or fully off, and whether the method needed setup before the button failed. Sleep wake methods are instant and need no preparation.

Lid open power on and Wake on LAN are strong backups, but they only help if they were switched on while the laptop still started normally. A docking station button is the best option after a failure at a desk, and repair is the only permanent fix for a laptop that must start anywhere.

MethodWorks whenSetup needed before button failsBest for
Lid open power onSleep, or shutdown on supported modelsYes, BIOS Power On When Lid is OpenedOwners who can still power on once to enable it
Keyboard or mouse wakeSleep onlyUsually none, wake permission by defaultA quick return from sleep
Wake on LANSleep, hibernate, or shutdown on S5 modelsYes, BIOS plus Windows adapter settingsA wired home or office network
Docking station buttonShutdown, sleep, or hibernateNo, a compatible HP dock is requiredA laptop that mostly lives on a desk
Battery removal and AC tryShutdown, older removable battery models onlyNo, but the result is unreliableA last low risk try on an older model
Power button board repairAny state, and it is a permanent fixNo, a repair shop visit is requiredA laptop that must work anywhere

How Do I Tell If My HP Laptop Is Asleep or Fully Off?

This check comes first because it decides which methods can possibly work. A laptop in sleep still has power to its memory and to wake devices, so a keyboard, mouse or lid sensor can bring it back.

A laptop that is shut down, in hibernation, or with a dead battery has no such listening state, except for Wake on LAN from a shutdown state on models that support it, and that is a special case covered later.

Look for signs of life before you try anything else. Is a charging light on when the charger is connected? Does the keyboard backlight flash, does the fan spin briefly, or does the screen show anything at all when you open the lid?

If the laptop was closed a short time ago and the battery was not flat, it is probably asleep, and the wake methods below are your best chance.

If it has been off for days, if the battery is empty, or if no light appears with the charger connected, treat it as fully off and move to the BIOS and docking station methods, while also checking the charger itself.

A flat pack can look exactly like a broken button, so it is worth learning how to tell whether your laptop battery is dead before you assume the button is at fault.

Charger checks sound obvious, but they prevent a common misdiagnosis. Try a different wall socket, check that the charger cable is fully seated at both ends, and look for a charging LED near the charging port.

If no LED appears on a known good socket, the problem may be the charger, the charging port or the battery, not only the power button.

If the adapter itself is in doubt, learning how to find the right charger for your laptop can help you confirm the wattage and connector before you buy a replacement.

Our guide to a Lenovo laptop that will not turn on covers the same charger and adapter checks in detail, and the logic applies just as well to HP, because a laptop with no power at all cannot be woken by any software setting.

If the charging light is on but the button does nothing, the button, its cable or its small circuit board is the likely fault, and the rest of this guide applies.

Also check for a black screen rather than no power. Connect an external monitor if you have one, and listen for fan or hard drive sounds after a wake attempt.

If the external monitor shows a picture while the built in screen stays black, the laptop may already be on and the screen is the problem, not the power button.

That distinction matters, because a screen repair and a power button repair are different jobs, and you should not open the laptop looking for a button fault when the machine is already running.

How Do I Wake an HP Laptop That Is Asleep Without the Power Button?

Start here if your laptop was recently in use and then closed or left idle. These methods need no BIOS change and no tools, but they only work from sleep, not from a full shutdown.

First, open the lid slowly and wait a few seconds. Many HP laptops are set to wake when the lid opens, and the screen should light up on its own. If nothing happens, close the lid fully, wait about ten seconds, then open it again.

A half open lid can leave the sensor in an uncertain state, and a clean close and open cycle gives it a clear signal.

Second, press a key on the built in keyboard. Try the spacebar or Enter first, then a letter key. On models with keyboard wake enabled, a key press is enough to wake the machine.

If the keyboard backlight is fitted, you may see it light up even before the screen does, which is a useful sign that the laptop is waking.

Our guide to how to turn the keyboard light on or off on an HP laptop explains the backlight key, and the same keyboard wake idea applies here: the keyboard must have wake permission in Windows for this to work, which it usually does by default for the built in keyboard.

Third, move or click a connected mouse, or tap the touchpad. A USB mouse or a wireless mouse with its receiver plugged in can wake a sleeping laptop if its wake permission is switched on.

If you are using a wireless mouse, check that it is switched on and that its battery is not flat, because a dead mouse looks exactly like a laptop that will not wake.

A Bluetooth mouse is less reliable for waking from sleep, because Bluetooth may be powered down in sleep, so a wired or receiver based mouse is the better test.

Fourth, try a USB keyboard if the built in keyboard does nothing. Connect a USB keyboard, wait a few seconds for Windows to recognise it, then press Enter or the spacebar. Some USB keyboards have a dedicated power key, and on a waking laptop that key can also work.

This test is useful because it separates a built in keyboard fault from a laptop that is truly not waking. If a USB keyboard wakes the laptop, the built in keyboard or its wake setting needs attention, but at least you are back in Windows and can change settings or back up files.

If none of these wake the laptop, do not keep pressing keys for ten minutes in the hope that one will eventually work. Either the laptop is not asleep, the battery is flat, or wake permission has been switched off.

Plug in the charger, leave it for at least fifteen minutes, then try the lid and key methods once more. A flat battery needs a short charge before any wake method can succeed, and a laptop that was forced off by a dead battery will need a full power on method, not a wake method.

One practical rule follows from this section, and it is worth remembering for the whole time the button is faulty. Once you get the laptop running by any method in this guide, avoid shutting it down completely until the button is repaired.

Use sleep for short breaks and hibernate for longer ones, with the charger connected when possible, so that lid or keyboard wake keeps working. A full shutdown removes your easiest way back in, and that is the mistake that turns a working workaround into another locked out laptop.

Rebooting a laptop properly is different from shutting it down, because a restart returns to Windows on its own, but a shutdown does not, so choose restart when Windows asks you to restart, and choose sleep when you are simply stepping away.

Laptop and monitor on a desk with images on the screens

How Do I Turn On an HP Laptop by Opening the Lid?

Power On When Lid is Opened is the cleanest button free startup method HP offers, but it has a strict condition: it must be switched on in BIOS while the laptop can still be powered on normally.

If your power button has already failed and this setting was never switched on, this section will not help you this time, but it is the setting to enable the moment the button is repaired, so the next failure does not lock you out again.

On supported HP models, the setting lives in BIOS Setup under System Configuration and then Boot Options, and it is named Power On When Lid is Opened.

HP documentation and HP support staff point to this name on Pavilion and similar consumer models, while business models may use a different menu layout or may not offer the option at all. That model difference is important. Do not assume your laptop has it because another HP laptop does.

The BIOS screen itself is the authority for your machine.

To enable it, shut the laptop down normally while the button still works, switch it on, and press Esc repeatedly as soon as the HP logo appears until the Startup Menu appears. Then press F10 to enter BIOS Setup.

Use the arrow keys to move to System Configuration, then Boot Options, and look for Power On When Lid is Opened. Set it to enabled, then go to Exit and choose Exit Saving Changes.

The laptop will restart, and from then on, closing the lid fully and then opening it should start a laptop that is shut down, as well as wake one that is asleep, on models that support startup from lid open.

Test it properly before you rely on it. Shut the laptop down, close the lid completely, wait about ten seconds, then open the lid and watch for the HP logo. If it starts, the method works on your model.

If it does not start, check that you saved the BIOS change, because exiting BIOS without saving is the most common reason this fails, and check whether the option exists at all.

If the option is missing from your BIOS, your model does not support lid open startup, and you need Wake on LAN or a docking station instead.

Do not change unrelated BIOS settings while you are in there, and do not disable Secure Boot or change the boot order in the hope that it will help, because neither affects lid open power on.

There is a useful side effect to know about. Once lid open power on is enabled, the laptop may start when you open it in a bag or case, which can drain the battery and generate heat.

If you travel with the laptop, shut it down and keep it in a way that the lid cannot open on its own, or use hibernate and a protective sleeve that holds the lid closed.

This is a small trade off for a button free startup, but it is worth knowing before you blame a new battery drain on something else.

How Do I Set Up Wake on LAN on an HP Laptop?

Wake on LAN, often shortened to WoL, lets another device on the same wired network send a special signal called a magic packet that powers on or wakes the laptop.

HP supports it on many models, but again it must be set up in both BIOS and Windows before the button fails, it needs a wired Ethernet connection, and it does not work over Wi-Fi on most HP laptops. Those three limits explain most Wake on LAN failures, so read them before you start.

First, enable Wake on LAN in BIOS. Restart the laptop, press Esc repeatedly at the HP logo, then F10 for BIOS Setup. Look under Advanced and then Power Management Options, or on some business models under Built-in Device Options, for Wake on LAN or Wake on LAN from S4/S5.

S4 is hibernation and S5 is a full shutdown, so an option that mentions S4/S5 is the one that can power on a shut down laptop, where supported. Enable it, and if Deep Sleep Control is present, set it to disabled, because deep sleep can block the network adapter from listening for the magic packet.

Save with F10 and exit.

Second, enable wake permission in Windows. Open Device Manager, expand Network Adapters, right click your Ethernet adapter, and choose Properties. On the Power Management tab, tick Allow this device to wake the computer, and if present, tick Only allow a magic packet to wake the computer.

This second box is useful because it stops ordinary network traffic from waking the laptop at random. On the Advanced tab, look for Wake on Magic Packet and set it to Enabled if your adapter offers it.

If the Power Management tab is missing, update the network driver from HP Support for your exact model, because the tab depends on the driver, and an older driver may hide it.

Third, deal with Fast Startup, because it can interfere with a full shutdown wake. Fast Startup is a Windows feature that puts the laptop into a hybrid state rather than a true shutdown, and HP support guidance for Wake on LAN often includes switching it off for reliable testing.

Open Control Panel, choose Power Options, then Choose what the power buttons do, then Change settings that are currently unavailable, and untick Turn on fast startup. Save the change and restart. You may notice shutdown and startup take slightly longer afterwards, which is normal without Fast Startup, and it makes the wake test more honest.

Fourth, test Wake on LAN while the power button still works.

Note the laptop Ethernet MAC address from the network adapter properties or from your router, connect the laptop by Ethernet cable to the same network as a second device such as a phone or another computer, shut the laptop down.

Then send a magic packet from the second device using a Wake on LAN app, entering the MAC address exactly.

If the laptop powers on, the setup works. If it does not, check the cable first, then check that the Ethernet port still shows a link light when the laptop is off, because some laptops cut power to the port completely in shutdown, and no magic packet can reach an adapter with no power.

A laptop connected only by Wi-Fi, a laptop on a different network segment, and a laptop whose BIOS has no Wake on LAN option will all fail this test for hardware reasons, not because you entered the MAC address wrong, although double checking the address is still worthwhile.

Wake on LAN is powerful, but it is not a general remote power button for travel. It works on your home or office wired network, it needs the laptop to stay connected by cable and to mains power, and it needs a second device on the same network to send the packet.

If you need to power on a laptop in another building or another city, Wake on LAN over the internet needs router port forwarding and security steps that are outside the scope of a button workaround, and they introduce risks that are not worth taking just to avoid a button repair.

For home use, however, it is a genuinely useful backup, and it is worth setting up on any HP laptop whose button is starting to feel unreliable.

Can a Docking Station Turn On an HP Laptop Without the Power Button?

Yes, on models where the docking station is designed for it, and this is often the easiest method after the button has already failed, because it needs no prior BIOS setup beyond what the dock itself provides.

Many HP USB-C and Thunderbolt docking stations have a power button on the dock, and pressing it powers on a connected HP laptop, charges it, and connects its external monitor and accessories at the same time.

This works because the dock communicates power on through the USB-C connection on supported laptops, not because it presses the laptop button remotely.

To try it, connect the laptop to the dock with the dock USB-C cable, make sure the dock itself is connected to mains power, then press the power button on the dock once and wait for the HP logo.

If the laptop powers on, you have a repeatable method for every startup until the button is repaired. Keep the dock connected and powered, and use the dock button as your new power button.

If the dock has no power button, or if pressing it does nothing, your combination of laptop and dock may not support dock power on, and a different dock will not necessarily fix it.

Check the dock manual for your exact laptop model before buying a dock for this purpose alone, because dock power on is a feature of specific HP dock and laptop combinations, not a universal USB-C feature.

A docking station also helps in another way. Once the laptop is on, you can use an external keyboard, mouse and monitor comfortably, and you can keep the laptop lid closed in clamshell mode if your model supports it. That makes a faulty button much less disruptive while you arrange a repair.

The dock does not fix the button, and it does not help when you are away from your desk, but for a laptop that mostly lives on a desk, it is the most practical workaround in this guide, and it avoids any internal work at all.

If you plan to expand that desk setup further, learning how to connect two monitors to a laptop can help you place the screens around the dock without another round of trial and error.

If you do not already own a compatible dock, weigh the cost honestly before buying one solely as a button workaround. A power button board repair is often cheaper than a good Thunderbolt dock, and it restores the laptop for use anywhere, not only at a desk.

A dock is worth buying if you also want an external monitor, wired network and charging through one cable, which is a common desk setup anyway. It is less sensible as a single purpose purchase for a button that a repair shop could replace in one visit.

What About the Battery Removal and Wall Socket Method?

You may have seen a method that says to remove the battery, unplug the laptop, plug it into a wall socket, and watch it turn on by itself. Treat this claim with caution, because it is not an HP documented startup method and it does not work reliably on modern HP laptops.

Some older laptops with a removable battery would power on when AC power was restored if their BIOS was set to restore on AC power loss.

And some owners report the same effect after a battery removal and reconnection, but that behaviour depends on the model, the BIOS setting, and whether the laptop was in a particular power state. It is not a method you can rely on, and it should never be presented as guaranteed.

If you want to try it safely on an older HP laptop with a removable battery, the steps are simple and low risk, provided you do not open the case.

Shut the laptop down if it is running, disconnect the charger, remove the battery using its release latches, wait about thirty seconds, reconnect the charger without the battery, and see whether the laptop powers on by itself or whether its charging light changes.

If nothing happens, reconnect the battery, plug in the charger, and move on to another method.

Do not repeat the cycle many times, and do not leave the battery out for long periods while you test, because a laptop running without its battery is more vulnerable to a power cut, and any unsaved work will be lost if the charger is knocked out.

If you do need a replacement pack for that older model, learning how to find your HP laptop battery model number first will help you match the label on the old battery instead of guessing from the laptop model alone.

On modern HP laptops with a sealed internal battery, there is no user removable battery to try this with, and opening the base to disconnect the internal battery is a repair step, not a startup trick. If your laptop has no battery release latch on the underside, do not open it for this method.

The battery removal idea is also sometimes confused with a power drain, where you disconnect power and hold the power button for fifteen seconds to discharge residual power.

That drain can help a laptop that is stuck in a strange power state, but it needs a working power button to perform, so it is not a workaround for a broken button, even though it appears in many troubleshooting lists.

The honest place for this method in a guide is as a low risk try on older removable battery models, with no promise attached. If it works, back up your files immediately and avoid shutting down until the button is repaired, because the same trick may not work a second time.

If it does not work, you have lost only a few minutes, and you have ruled out one more possibility before moving to repair.

What Is the Motherboard Pin Method, and Should I Try It?

The motherboard pin method is the most widely shared emergency method online, and also the one most likely to cause damage if done casually. In outline, the laptop power button connects to the motherboard through a small cable or board, and pressing the button briefly joins two contacts that tell the motherboard to power on.

A technician with the service manual for your exact model can identify those contacts, disconnect power safely, and trigger the same signal in a controlled way to test whether the button or its cable is at fault. That diagnostic use, by a person who knows the board layout, is legitimate.

What is not legitimate as home advice is telling every owner to open the laptop, find three to six pins by eye, and join them with a screwdriver until something happens.

HP motherboards differ between models, the power button header is not labelled in the same place on every board, and joining the wrong pins can short a circuit, damage the board, or cause a spark.

A screwdriver is also a poor tool for this, because it is large, conductive across a wide area, and easy to slip onto a neighbouring component. The original version of this post described this method in those casual terms, and that advice should not be followed as written.

If you are technically confident, have the official HP service manual for your exact product number, can disconnect both the charger and the internal battery, and can identify the power button connector from the manual rather than by guessing, you are in a different position from a first time opener.

And even then the sensible use of the method is a single diagnostic test, not a daily startup routine. For everyone else, the pin method is a reason to visit a repair shop, not a reason to open the laptop.

Tell the technician that the button does not respond but the charging light works, and that you suspect the button board or cable, because that information helps them test the right part first.

The same caution applies to reseating cables. A loose power button ribbon cable can cause exactly this fault, and reseating it can fix it, but reaching that cable means opening the base, disconnecting the battery, and handling a fragile ribbon connector.

If the laptop is under warranty, opening it yourself can affect that warranty, and HP Support should be contacted first. If it is out of warranty and you are comfortable opening laptops, use the service manual, work on a clean static free surface, and stop if any connector resists or looks different from the manual.

A repair shop will usually diagnose a button board fault quickly, and a replacement button board is a small part compared with a motherboard damaged by a wrong short.

How Do I Get the Power Button Repaired, and What Should I Do First?

If no wake, lid, Wake on LAN or dock method works, or if a workaround works but you need a laptop you can switch on anywhere, repair is the real fix, and it is usually simpler than owners expect.

The fault is most often the power button board, the ribbon cable between that board and the motherboard, or the button mechanism itself, rather than the whole motherboard. A repair shop can test those parts separately, and on many HP models the button board is a small replaceable part.

Before you hand the laptop over, use any working method to back up your files, because repair shops may need to test the laptop, update BIOS, or in rare cases reinstall Windows if a deeper fault is found.

Copy important documents, photos and work files to an external drive or cloud storage, and note your Windows sign in details and any BitLocker recovery key if your drive is encrypted, because a repair that involves the motherboard can trigger a BitLocker prompt on the next startup.

If the laptop will not power on at all, tell the shop that your data is on the drive and ask whether they can preserve it, rather than assuming a repair includes data recovery.

Check warranty first through HP Support by entering your serial number, which is on the underside sticker or, if the laptop powers on by a workaround, in HP Support Assistant. A laptop under warranty should go to HP or an HP authorised repairer, because an independent repair can affect warranty coverage.

Out of warranty, a reputable local repair shop is often faster and cheaper, but ask for a diagnosis before authorising a motherboard replacement, because a button board fault should not need a whole new motherboard. Get the diagnosis in writing: which part failed, what the replacement part costs, and whether the repair is guaranteed.

If the shop also flags a worn battery during that diagnosis, it is worth checking what a laptop battery replacement usually costs before you approve the extra part, so a small button repair does not quietly turn into a much larger bill.

While you wait for repair, keep the laptop in a usable state if any workaround works. Use sleep instead of shutdown, keep the charger connected when possible, and avoid letting the battery run flat, because a flat battery plus a faulty button is the combination that locks you out again.

If the laptop is completely dead and you need files urgently, a repair shop can often remove the drive and copy data to another machine, even before the power fault is fixed, so ask about that option rather than opening the laptop yourself under time pressure.

Keeping it connected for days on end can still wear the pack, so if you leave it plugged in while you wait, learning how to limit the laptop battery charge to 80 percent can reduce that strain without changing how you use the workaround.

Frequently Asked Questions

Can I turn on an HP laptop without the power button?

Yes, in some cases. If the laptop is asleep, opening the lid, pressing a key, or moving a wake enabled mouse can wake it. If it is fully off, Power On When Lid is Opened, Wake on LAN, or a compatible docking station power button can start it, but the first two must be set up in BIOS before the button fails. If none of those apply, the button itself needs repair.

How do I turn on my HP laptop if the power button is broken?

First check whether it is asleep or off, and whether the charger light is on. Try lid open wake, a key press, and a mouse movement for sleep. For a fully off laptop, try a docking station power button if you have a compatible HP dock. If those fail, book a power button board repair, and do not short motherboard pins with a screwdriver as a casual fix.

Does opening the lid turn on an HP laptop?

On supported models, yes, but only if Power On When Lid is Opened is enabled in BIOS under System Configuration and Boot Options. You enable it by pressing Esc then F10 at startup, setting the option, and saving the change. If your BIOS has no such option, your model does not support lid open startup.

Can Wake on LAN turn on a shut down HP laptop?

On models that support Wake on LAN from S5, yes, provided it is enabled in BIOS and in the Windows network adapter settings, Fast Startup is off, the laptop is connected by Ethernet cable, and a magic packet is sent from another device on the same network. It generally does not work over Wi-Fi on HP laptops.

Why will my HP laptop not turn on at all, even with the charger connected?

Check the charger, socket and charging light first, because no power at all looks like a button fault. If the charging light is on but nothing else responds, the button board, its cable, or a deeper hardware fault is likely. If no charging light appears on a known good socket, the charger, charging port, battery or motherboard power circuit needs diagnosis, and a repair shop should test those parts in order.

The Verdict

Turning on an HP laptop without the power button is possible, but only within clear limits, and a guide that promises a universal trick does you a disservice. Sleep is your friend: lid, keyboard and mouse wake methods will get a sleeping laptop back with no setup and no tools.

Lid open power on and Wake on LAN are excellent backups, but they must be switched on in BIOS and Windows while the button still works, so enable them now if your model supports them, before you need them.

A compatible docking station is the best desk based workaround after a failure, because it needs no internal work and gives you a new power button at your desk.

Beyond those methods, the honest answer is repair. A faulty button board or cable is a small, replaceable part on most HP laptops, and a proper diagnosis is cheaper and safer than guessing at motherboard pins with a screwdriver.

While you wait, back up your files, use sleep instead of shutdown, keep the charger connected, and do not let the battery run flat.

Set up the BIOS backups on your repaired laptop, note which method works on your exact model, and the next time the button falters, you will have a way back in that does not depend on luck.

Similar Posts