Two computer monitors on a clean desk.

How to Check Screen Refresh Rate on a Laptop

Quick Answer: On Windows 11, open Settings, go to System, then Display, then Advanced display, and look at the Refresh rate line under Display information. That number is the rate your screen is actually running at right now, in hertz (Hz). On Windows 10 the same page is called Advanced display settings, and on a MacBook it is System Settings, then Displays, then the Refresh Rate menu. If the number is lower than the rate printed on the box, your laptop is probably still set to the 60 Hz factory default, and you can change it from the same menu in about ten seconds.

What refresh rate actually means

Refresh rate is the number of times per second your screen redraws the image, measured in hertz (Hz). A 60 Hz screen redraws 60 times a second. A 144 Hz screen redraws 144 times a second. The higher the number, the smoother motion looks, because each frame stays on screen for a shorter time and moving objects jump a smaller distance between frames.

That smoothness is most obvious in three places. Scrolling a long web page looks calmer and easier to read. Moving the mouse pointer leaves less of a trail. And in games, fast camera movement stays readable instead of turning into a smear. It is the same reason a 120 Hz phone screen feels nicer than a 60 Hz one, even though both show the same apps.

Refresh rate is not the same thing as resolution. Resolution is how many pixels the screen has, and it decides sharpness. Refresh rate is how often those pixels update, and it decides smoothness. A 4K screen at 60 Hz is sharper than a 1080p screen at 144 Hz, but the 1080p screen feels smoother in motion. The two specs answer different questions, and our guide to 4K vs 1080p on a laptop explains when each one matters more.

Most laptops sold today have a 60 Hz screen, and that is fine for office work, browsing and video. Gaming laptops and premium ultrabooks usually offer 120 Hz, 144 Hz or 165 Hz, and high-end gaming machines go to 240 Hz or even 360 Hz. The panel type matters too: an OLED screen and an IPS screen can share the same refresh rate and still look different in motion, which is why our IPS vs OLED laptop comparison covers response time alongside refresh rate. Laptop screen sizes are a separate choice again, and they do not change the refresh rate.

Before you spend money on a faster screen or a new monitor, check what you already have. Plenty of people buy a 144 Hz laptop and run it at 60 Hz for months without knowing, because Windows picks the safe default when the machine is first set up. The checks below take about a minute each, and they tell you both the rate your screen is running at now and the fastest rate it supports.

How to check refresh rate on Windows 11

This is the fastest method, and it works on every Windows 11 laptop. It also shows the rate for an external monitor, if one is connected.

  1. Right-click an empty spot on the desktop and choose Display settings. You can also press Windows key + I to open Settings, then go to System, then Display.
  2. Scroll down and click Advanced display.
  3. At the top, pick the display you want to check from the Choose a display dropdown, if you have more than one screen.
  4. Look at the Display information section. The Refresh rate line shows the rate your screen is running at right now, for example 60 Hz or 144 Hz.
  5. To change it, click the Choose a refresh rate dropdown on the same page and pick a different rate, then click Keep changes. If you do nothing, Windows reverts to the old rate after 15 seconds.

Two details on this page catch people out. First, a rate with an asterisk next to it, such as 144 Hz*, does not work at your current resolution. Picking it changes the resolution as well, so only choose it if you are happy with that trade. Second, some laptops show a Dynamic refresh rate option. When it is on, Windows raises and lowers the rate by itself to save battery, so the number you see can change from moment to moment. Dynamic refresh rate needs a display that supports variable refresh and a rate of at least 120 Hz, and it only appears on Windows 11.

If you use an external monitor with your laptop closed, the same page covers that screen too. Pick the external display from the Choose a display dropdown and the numbers change to match it. Our guide on how to use a laptop with the lid closed walks through the full external monitor setup if you have not done it before.

How to check refresh rate on Windows 10

Windows 10 has the same setting, but the path is one step longer on older builds. Newer Windows 10 versions (20H2 and later) show the refresh rate dropdown on the Advanced display page, just like Windows 11. On older builds, the rate hides one level deeper, behind the display adapter properties.

  1. Right-click an empty spot on the desktop and choose Display settings.
  2. Scroll down and click Advanced display settings.
  3. If you see a Refresh rate dropdown on this page, that is your current rate, and you can change it right there.
  4. If there is no dropdown, click Display adapter properties for the display you want to check.
  5. In the window that opens, go to the Monitor tab. The Screen refresh rate dropdown shows the current rate, and the list shows every rate the screen supports.
  6. To change it, pick a rate from the dropdown, click Apply, then OK.

The Monitor tab method still works on Windows 11 too, through the same Display adapter properties link on the Advanced display page. It is worth knowing because it is the method most older guides describe, and it is the one that shows the full list of supported rates even when the Settings page only shows a few.

How to check refresh rate on a MacBook

On a Mac, the refresh rate lives in the Displays settings, and the exact steps depend on your macOS version.

  1. Click the Apple menu, then open System Settings (on older macOS versions it is called System Preferences).
  2. Click Displays in the sidebar.
  3. Select the display you want to check. If an external monitor is connected, click its thumbnail first.
  4. Look for the Refresh Rate pop-up menu. The selected value is the rate your screen is running at now. Click it to see the other rates the display supports.

On older macOS versions, the Refresh Rate menu only appears if you hold the Option key while clicking the Scaled button in the Displays pane. If you do not see the menu at all, that is usually why.

MacBook Pro 14-inch and 16-inch models with ProMotion are a special case. Their screens adapt between 24 Hz and 120 Hz depending on what is on screen, to save battery, so the menu shows ProMotion instead of a single number. Picking ProMotion lets the screen vary the rate on its own. You can also pick a fixed rate such as 60 Hz from the same menu if you want the screen to stop changing, for example when you are editing video and want a locked frame rate.

MacBook Air models do not have ProMotion. Their built-in screens run at 60 Hz, and the Refresh Rate menu on an Air will normally show only 60 Hz for the built-in display. A faster rate only appears when a high refresh external monitor is connected.

How to check refresh rate with dxdiag

The DirectX Diagnostic Tool, dxdiag, is a built-in Windows tool that reports the display mode Windows is actually using. It is useful when the Settings page looks wrong, or when you want to confirm the number from a second place.

  1. Press Windows key + R to open the Run box.
  2. Type dxdiag and press Enter. Click Yes if Windows asks whether to check driver signatures.
  3. Go to the Display tab. If you have more than one display, use Display 1, Display 2, and so on.
  4. Find the Current Display Mode line. It reads something like 1920 x 1080 (32 bit) (144Hz). The number in brackets at the end is your refresh rate.

dxdiag also shows the graphics card name and the driver version on the same tab, which helps when the refresh rate list is short because the graphics driver is missing or out of date. If the Display tab shows Microsoft Basic Display Adapter instead of your real graphics card, Windows is running on a generic driver, and the full list of refresh rates will not appear until the proper driver is installed from the laptop maker’s support page. Checking the graphics card itself is a separate step, and our guide on how to check VRAM on a laptop shows where to find the card details.

Check it in your graphics control panel

Both NVIDIA and AMD ship their own control panels, and each one shows the refresh rate for every connected display. These panels are also where you change the rate for an external gaming monitor, because they list rates the Windows Settings page sometimes hides.

NVIDIA Control Panel

Right-click the desktop and choose NVIDIA Control Panel. In the left panel, open Display, then click Change resolution. Select the display, and the Refresh rate dropdown shows the current rate with the full list of supported rates underneath. Pick a rate and click Apply. If the NVIDIA Control Panel is missing from the right-click menu, it is usually because the driver was installed without it, and reinstalling the driver from NVIDIA’s site brings it back.

AMD Software

Right-click the desktop and choose AMD Software. Go to the Display section (on newer versions it is under Gaming, then Display). The panel shows the current refresh rate for the selected display, and the custom resolution options let you add rates the monitor supports but Windows does not list. AMD’s FreeSync setting lives on the same page, and it only works when the screen and the graphics card both support it.

Intel Graphics Command Center

On laptops with Intel integrated graphics, open the Intel Graphics Command Center from the Start menu, go to Display, and look at the Refresh Rate dropdown. The panel also shows the resolution and the color depth for the same display. Intel’s tool is the one to use on ultrabooks without a separate NVIDIA or AMD card.

One more thing the control panels reveal is whether the laptop’s own screen is connected through the integrated graphics or straight to the discrete GPU. On many gaming laptops, the built-in screen runs through the integrated graphics unless a MUX switch is turned on, and that path can cap the refresh rate or add latency. Our guide to what a MUX switch does on a gaming laptop explains when that matters and how to switch it.

Check it with a free online test

An online refresh rate test measures the rate from inside the browser, which is a useful cross-check when Windows and the monitor disagree. The best known one is TestUFO, at testufo.com, and there are simpler alternatives such as Refresh Rate Tester. They all work the same way: the page animates a moving object and counts how many frames the browser actually draws per second.

  1. Move the browser window to the screen you want to test, if you have more than one.
  2. Open the test page and keep the tab in the foreground for a few seconds.
  3. Read the refresh rate number the page reports. It should match the rate Windows shows. On a 144 Hz screen it should read close to 144, not 60.

Online tests have two limits worth knowing. First, they measure what the browser sees, not what the panel is doing, so a browser capped at 60 frames per second will report 60 even on a 144 Hz screen. Use Chrome or Edge, close other heavy tabs, and if the number looks wrong, check the Windows setting first. Second, Dynamic refresh rate on Windows 11 can make the test read lower than the screen’s maximum, because Windows drops the rate while a browser tab is idle. That is normal behaviour, not a fault.

A monitor’s own on-screen menu is the final authority. Most gaming monitors can show the rate they are actually receiving, usually under an Information or OSD section reached from the buttons on the monitor itself. If Windows says 144 Hz and the monitor says 60 Hz, trust the monitor, because it reports what is actually coming down the cable.

How to check the maximum refresh rate your screen supports

The current rate and the maximum rate are two different numbers, and the Settings page shows both. The current rate is the one selected in the dropdown. The maximum is the highest number in that same dropdown list. If the list tops out at 60 Hz, the panel itself is a 60 Hz panel, and no setting can make it faster. If the list goes up to 144 Hz or 165 Hz but 60 Hz is selected, the panel can go faster and you only need to change the setting.

When the dropdown list looks short or the maximum seems wrong, check the laptop’s spec sheet on the maker’s own site. Search for the exact model number, not the series name, because the same model line often ships with two or three different screens. A Lenovo IdeaPad Gaming 3, for example, has shipped with both 60 Hz and 120 Hz panels under the same name. The spec sheet lists the panel’s maximum rate, and it is the only place that number is guaranteed to be right.

For an external monitor, the maximum also depends on the cable and the port, not just the panel. An old HDMI 1.4 cable caps a 1080p signal at 120 Hz and a 4K signal at 30 Hz, even if the monitor supports more. A DisplayPort cable or an HDMI 2.0 or 2.1 cable removes that limit. If the monitor’s own menu shows a lower maximum than the spec sheet promises, the cable is the first thing to swap.

Laptop with a bright screen on a desk against a white brick wall

Why your 144Hz screen shows 60Hz

This is the most common refresh rate problem, and it almost always has a boring cause. Work through the list in order, because the first two items fix most cases.

CauseHow to tellFix
Windows picked 60 Hz as the defaultThe dropdown list goes higher than 60 Hz, but 60 Hz is selectedPick the higher rate in Advanced display settings and click Keep changes
Power saving or Dynamic refresh rateThe rate drops on battery, or varies while you watchPlug in the charger, or turn off Dynamic refresh rate in Advanced display
Wrong cable or portExternal monitor, and the list tops out lowUse DisplayPort, or an HDMI 2.0 or 2.1 cable, on the fastest port
Graphics driver missingDevice Manager shows Microsoft Basic Display AdapterInstall the driver from the laptop maker or NVIDIA, AMD or Intel
Game or app overrides the rateOnly one game or program looks wrongCheck the in-game display settings, not Windows
Screen is actually 60 HzThe dropdown list tops out at 60 HzNothing to change, the panel is a 60 Hz panel

One cause that looks like a fault but is not: some laptops cap the refresh rate on battery to save power, even when the charger is plugged into a low-wattage USB-C charger instead of the original power brick. If the rate is stuck at 60 Hz on battery and jumps to 144 Hz the moment the proper charger is connected, that is the power plan working as designed, not a broken screen.

Heat can also play a part. A laptop that is thermal throttling will sometimes drop the refresh rate along with the clock speeds, because the system is protecting itself. If the rate only drops during long gaming sessions, check the temperatures before blaming the screen. Our guides on how to check laptop temperature and what thermal throttling is cover both checks.

Which refresh rate should you use?

There is no single right answer, because the best rate depends on what you do and whether you are plugged in. The table below is a practical starting point.

Refresh rateBest forTrade-off
60 HzOffice work, browsing, video, battery lifeMotion looks less smooth in games and scrolling
90 to 120 HzEveryday use, light gaming, smooth scrollingSmall battery cost, big smoothness gain
144 to 165 HzCompetitive and single-player gamingNeeds a GPU that can push matching frame rates
240 Hz and aboveEsports titles at high frame ratesOnly worth it on fast esports games, heavy battery cost

For most people, 120 Hz or 144 Hz is the sweet spot. The jump from 60 Hz to 120 Hz is obvious to almost everyone. The jump from 144 Hz to 240 Hz is much smaller, and only regular players of fast shooters will notice it. Past 240 Hz, the gains are small enough that most buyers are better off spending the money on a better GPU or a brighter screen.

The rate only helps if the graphics card can keep up. A 144 Hz screen showing a game that runs at 60 frames per second still refreshes 144 times a second, but it repeats frames, so the motion looks like 60 frames per second anyway. That is why the refresh rate and the frame rate have to be considered together, and it is also why a faster screen is wasted on a weak GPU. If your games run below the screen’s rate, our guide on how to increase FPS on a gaming laptop covers the 12 settings that actually work, and our comparison of RTX 5050 vs RTX 4050 laptop GPUs shows what the current budget cards can push. DLSS can close the gap on RTX laptops by rendering at a lower resolution and rebuilding the image, which is often the cheapest way to reach 144 frames per second.

On battery, the honest answer is to drop back to 60 Hz. A 144 Hz screen draws noticeably more power than a 60 Hz one, and the battery pays for it. Windows Dynamic refresh rate does this automatically on supported laptops, dropping to 60 Hz for reading and jumping up for scrolling and gaming. If your laptop does not have that option, switching to 60 Hz manually before a long flight or a day of classes is worth the ten seconds it takes.

If you are shopping for a laptop and want a 144 Hz screen without paying gaming laptop prices, look at budget gaming models rather than ultrabooks. A good example is the Lenovo LOQ 15 with a 144Hz display, which pairs a fast screen with a mid-range GPU at a price that undercuts most premium ultrabooks. Our roundup of the best gaming laptops under $700 lists more options at the budget end, and our gaming laptop vs desktop comparison explains when a desktop with a fast external monitor is the better buy instead.

Refresh rate vs frame rate: not the same thing

People mix these two up constantly, so here is the short version. Frame rate, measured in FPS, is how many frames per second the graphics card renders. Refresh rate, measured in Hz, is how many times per second the screen shows a new image. The screen can only show what the card has rendered, so the frame rate is the ceiling and the refresh rate is the window.

If the card renders 200 frames per second and the screen refreshes at 60 Hz, you see 60 frames a second and the extra frames are wasted. If the card renders 60 frames per second and the screen refreshes at 144 Hz, you still see 60 frames a second, because the screen repeats frames to fill the gaps. The smooth result only happens when both numbers are high together: a fast card and a fast screen.

That is also why a high refresh rate screen can make a game feel worse if the frame rate is unstable. When the frame rate jumps between 40 and 120, the mismatch shows up as stuttering or tearing, where the top and bottom of the screen show different frames. Variable refresh rate technology, NVIDIA G-Sync and AMD FreeSync, fixes this by letting the screen match the card’s pace instead of the other way round. Both need a compatible screen and graphics card, and both are covered in more detail in our display guides.

Frequently Asked Questions

How do I check my monitor Hz on Windows 11?

Open Settings, go to System, then Display, then Advanced display, and look at the Refresh rate line under Display information. That is the rate your screen is running at right now. The Choose a refresh rate dropdown on the same page lists every rate the screen supports, and you can change it there.

How do I know if my laptop is 60Hz or 144Hz?

Check the Advanced display page in Windows Settings and look at the highest number in the Choose a refresh rate dropdown. That is the fastest rate your panel supports. If the list tops out at 60 Hz, the panel is a 60 Hz panel. If it goes to 144 Hz, the panel supports 144 Hz, even if Windows currently has 60 Hz selected. The spec sheet on the laptop maker’s site, searched by exact model number, confirms it.

How do I check refresh rate on a MacBook?

Open System Settings, click Displays, select the display, and look at the Refresh Rate pop-up menu. On older macOS versions, hold the Option key while clicking Scaled in the Displays pane to reveal the menu. MacBook Pro models with ProMotion show ProMotion instead of a fixed number, because the screen varies between 24 Hz and 120 Hz on its own.

Why is my 144Hz monitor only showing 60Hz?

The most common reason is that Windows defaulted to 60 Hz when the display was first connected, and you only need to pick 144 Hz in Advanced display settings. If 144 Hz is not in the list, check the cable and port next: an old HDMI 1.4 cable or a slow port can cap the rate. A missing graphics driver, which shows as Microsoft Basic Display Adapter in Device Manager, also hides the higher rates. Power saving and Dynamic refresh rate can drop the rate on battery too.

Is 120Hz better than 60Hz on a laptop?

Yes, for almost everyone who notices motion. Scrolling, mouse movement and games all look smoother at 120 Hz, and the difference is obvious the first time you use it. The cost is battery life: a 120 Hz screen uses more power than a 60 Hz one. For office work and video, 60 Hz is fine, but if your laptop offers 120 Hz, it is worth using when plugged in.

Does refresh rate affect battery life?

Yes. A higher refresh rate makes the screen and the graphics card work harder, so the battery drains faster. The effect is biggest at 144 Hz and above. Windows 11 Dynamic refresh rate reduces the cost by dropping to 60 Hz when the screen is idle and raising it when you scroll or play. If your laptop does not have that option, switching to 60 Hz manually before a long stretch on battery is the simplest fix.

What is a good refresh rate for a laptop?

For everyday use, 120 Hz is the sweet spot: visibly smoother than 60 Hz without a big battery penalty. For gaming, 144 Hz or 165 Hz is the standard, because it matches what mid-range graphics cards can actually deliver. Rates of 240 Hz and above only pay off in fast esports games where the graphics card can hold 240 frames per second. For office work and video, 60 Hz is still perfectly good.

Similar Posts