How To Keep The Gaming Laptop Cool?

How to Keep a Gaming Laptop Cool

A gaming laptop is supposed to get warm. A powerful processor and a dedicated graphics chip are packed into a thin case, and both of them turn electricity into heat every second a game is running. Warmth during a demanding game is normal.

What is not normal is a laptop that slows down mid match, shuts itself off, feels painfully hot on the keyboard deck, or sounds like a small jet engine during light work.

Those are signs that the cooling system is losing the fight, and in most cases the cause is simple: blocked air, dust in the vents, too much background work, or a power setting that keeps everything at full speed for no reason.

This guide works through the fixes in the right order. It starts with the free checks that cost nothing, then moves to cleaning, cooling pads, fan profiles, and in game settings, and it ends with the hardware faults that need a technician Before changing anything, it helps to know your starting point, so our guide to how to check laptop temperature (CPU and GPU) shows how to read both sensors first.

It follows the guidance published by ASUS, MSI, Lenovo, and Microsoft, so you will not be asked to open the machine without a warning, to force a fan off, or to change a setting that puts the laptop at risk.

A gaming laptop will never run as cool as a desktop with large fans and open space, but it should be able to finish a long session without throttling, crashing, or shutting down.

Cooling matters for frame rates too: a laptop that stops throttling holds its FPS, and our guide to how to increase FPS on a gaming laptop shows the full set of settings that work alongside cooling.

Quick Answer: Put your gaming laptop on a hard, flat surface with clear space around its vents, and lift the rear slightly so the bottom intakes can breathe. Clean the vents with short bursts of canned compressed air while the laptop is off and unplugged. Close heavy background apps, use your maker app to pick a Balanced or Performance cooling profile, cap the frame rate in demanding games, and add a cooling pad only after airflow and cleaning are sorted. If the laptop still shuts down, grinds, or smells hot, stop gaming on it and get the fan, heatsink, or battery checked.

Why Gaming Laptops Run Hot

A gaming laptop makes heat in three main places: the processor, the graphics chip, and the charging circuit when the battery is charging. During a game, the processor and the graphics chip both work near their limits, and the cooling system has only a short path to move that heat out.

Air comes in through grilles on the bottom or the sides, passes over a heatsink, and leaves through exhaust vents at the rear or the sides. When that path is clear, the system can hold temperatures in a workable range.

When any part of it is blocked, temperatures climb fast, because the same amount of heat has nowhere to go.

Thermal throttling is the protection that kicks in when a chip gets too hot. The processor or graphics chip lowers its clock speed to make less heat, which protects the hardware but also drops frame rates and causes stuttering.

If your laptop slows down once it gets hot, that slowdown has a name: thermal throttling is the chip cutting its own speed to stay cool, and our guide to what thermal throttling is on a laptop explains the signs and the temperature limits.

That is why a game can feel smooth for the first ten minutes and then suddenly feel choppy. The laptop is not broken at that moment. It is protecting itself. The fix is to give the cooling system a better chance, not to push the machine harder.

How hot is too hot? There is no single number for every model, and anyone who gives you one is guessing. Intel publishes a junction maximum, called TjMax, for its processors, and for many laptop chips that limit sits around 100 degrees Celsius. Before you change anything, check what a good GPU temperature for a gaming laptop is, so you know whether your numbers are actually a problem.

Reaching that limit briefly under a heavy boost is not the same as sitting at it all session.

ASUS ROG guidance suggests aiming for gaming temperatures in the 85 to 90 degree range for the processor in its own guide, while a Lenovo community discussion treats a processor mainly in the 80s and low 90s under load, with a graphics chip below about 86 degrees, as workable.

Use those figures as a rough sense check, not as a pass or fail test for your model. Check your own processor and graphics chip specifications, watch the trend over a session rather than a single spike, and worry most when high temperatures come with throttling, shutdowns, or a fan that never speeds up.

Room temperature matters more than most owners expect. A laptop that starts a session in a hot room, in direct sunlight, or next to a radiator has less headroom before it throttles. Makers generally rate laptops for rooms up to about 35 degrees Celsius.

Move out of direct sun, keep the room ventilated, and avoid stacking a gaming session on top of charging a fully drained battery in a very hot room when you have a choice. Small changes in starting temperature can mean a noticeable change in fan noise and sustained performance.

How to Check Whether Your Gaming Laptop Is Really Overheating

Do not judge heat by touch alone. A warm keyboard deck or a hot exhaust vent is expected during gaming, because that vent is doing its job by pushing hot air out. The useful evidence is temperature readings, fan behaviour, and performance together.

If temperatures climb, the fan stays at full speed, and frame rates fall after a few minutes, you have a real cooling problem. If the laptop is warm but frame rates stay steady and the fan settles after the game ends, the cooling system is probably coping.

Your maker app is the first place to look. ASUS Armoury Crate, Lenovo Vantage, MSI Center, HP OMEN Gaming Hub, and Acer PredatorSense all show temperatures and fan speeds for their own models, and they are the safest place to change a thermal profile.

If your maker app does not show a temperature, a free monitoring tool such as HWMonitor or HWiNFO can show processor and graphics temperatures, clock speeds, and fan speeds while a game runs.

Run the tool in the background during a normal session, note the highest sustained temperatures rather than a one second spike, and note whether clock speeds fall as temperatures rise. That pattern, high use with falling speed, is the signature of thermal throttling.

Also listen to the fan. A healthy fan hums or whooshes and changes speed smoothly as the load changes. A grinding, rattling, or clicking fan points to a worn bearing or a blade touching something, and no cleaning will fix that.

A fan that never spins, or a system fan error at startup, points to a failed fan. Write down what you find before you change anything, because it tells you whether cleaning and settings are worth trying first or whether the laptop should go straight to a service centre.

The Fixes at a Glance

FixWhat it doesEffortTry it first when
Hard surface plus rear liftRestores intake airflow under the laptopFree, one minuteThe laptop sits on a bed, lap, or soft cloth
Vent cleaningRemoves dust blocking the cooling pathLow, ten minutesFans are louder than when the laptop was new
Cooling pad or standAdds airflow and a better angleLow cost, plug inAirflow and cleaning helped but not enough
Maker fan profileRaises fan speed before heat buildsFree, two minutesTemperatures climb slowly during long sessions
Frame rate cap and lower settingsCuts the heat the game createsFree, per gameOne demanding game causes throttling
Background app cleanupRemoves extra processor loadFree, five minutesFans run loud during light work too
Driver and BIOS updatesFixes thermal and fan control bugsMedium, carefulHeat started after an update or is unexplained
Professional serviceCleans inside, checks fan and pastePaid, workshopCleaning and settings changed nothing
Laptop and monitor on a desk with images on the screens

Step 1: Give Your Gaming Laptop Room to Breathe

Start here, because it costs nothing and it often helps within minutes. Move the laptop to a desk or table, on a hard and level surface, with nothing under it except the desk itself. Make sure no vent is covered.

Vents are usually on the bottom, the sides, or the rear edge near the hinge, and their exact position depends on the model. If you cannot find them, check the maker manual for your model rather than guessing.

Keep the area around the laptop clear, with space at the sides and the rear so hot air can leave instead of being pulled straight back in. Do not game with the laptop inside a closed bag, on a thick cloth, or with a cover over the keyboard.

A bed, a blanket, a cushion, or a bare lap is the worst place for a gaming laptop. Soft material bends up against the bottom grilles and blocks the intake air in seconds.

That is why every major maker repeats the same first rule, and why ASUS ROG guidance puts proper positioning first: use a hard, flat surface, keep the area clutter free, and make sure nothing obstructs the exhaust vents.

If you must play away from a desk, use a lap desk with a rigid top, and check that its surface does not block the bottom vents. A soft lap desk that bends around the laptop does not solve the problem, even if it feels more comfortable.

Lifting the rear of the laptop by a small amount helps for a simple reason. Most gaming laptops draw a large share of their cooling air through the bottom. When the laptop sits flat on a desk, the gap under it is only the height of its rubber feet.

Raising the rear by an inch or two, with a stand or a sturdy book under the back edge, gives the intake fans a larger supply of cool air. A proper laptop stand does this best, because it holds the laptop at a stable angle and keeps the vents clear.

Do not block the rear exhaust while you lift the front, and do not tilt the laptop so steeply that it slides or strains the hinge.

The test is simple: after ten minutes of gaming, the fan should settle rather than stay at full speed, and the keyboard deck should feel warm rather than uncomfortably hot.

Step 2: Clean the Vents and Fans Without Opening the Case

Cleaning is the single most effective fix for a laptop that has slowly become hotter and louder. You can do the safe version without opening the case, and for most owners that is enough.

The full method is covered in detail in our guide on how to clean a laptop fan without opening its case, and the steps below follow the same maker safe method.

If your laptop still runs hot after this clean, the dust may be packed inside the heatsink fins, which outside cleaning cannot reach, and that is covered near the end of this guide.

  1. First, save your work, shut the laptop down fully, and unplug the power cable.
  2. Do not just close the lid or put the machine to sleep.
  3. Let the laptop cool for a few minutes if it is very hot.
  4. Next, find the vents and look at them in good light.

Dust often shows as a grey felt like layer across the grille. Use a can of canned compressed air, held upright, and give short bursts across the vents from outside. Short bursts matter. A long continuous blast can spin the fan too fast, and tipping the can can release cold liquid.

Work from the outside only if you are not opening the case. Blow dust out of the vents, not deeper into the machine, and stop if a burst pushes a visible clump further in.

Do not poke tools, cotton buds, or pins into the vent grille, because the fins behind the grille are thin and easy to bend.

Work through every vent, not just the most obvious one. Gaming laptops often have larger grilles in several places, and a blocked intake on one side can starve the whole system. Repeat the exhaust and intake passes a few times, because dust that the first pass loosened often only leaves on the second or third.

Brush the grille bars gently with a soft brush to lift lint and hair that air alone leaves clinging to the edges, then give the loosened debris one final short burst. After cleaning, reconnect power, switch on, and use the laptop normally for a while before judging the result.

The fan should reach full speed less often during light work, and it should settle faster after a heavy task ends.

How often should you clean? For a desk laptop in a clean room, every few months is a reasonable habit. For a laptop used on a bed, in a dusty home, or near pets, check monthly.

MSI support guidance also tells owners to shut the laptop down before cleaning, to keep ventilation clear, and to use compressed air cans while keeping a distance from the exhaust vents. That monthly look costs nothing: if the grille looks dusty, clean it before the laptop has to shout about it.

If the fan now makes a grinding, clicking, or rattling sound that it did not make before, stop and get it checked. A healthy fan hums or whooshes. A grinding fan is a worn bearing, and no amount of cleaning will fix it.

Step 3: Use a Cooling Pad the Right Way

A cooling pad is a stand with fans that blows extra air toward the bottom of the laptop. It can help, but it is not magic, and it will not fix a fan that has stopped spinning or a heatsink packed with dust.

Think of it as extra help for a cooling system that already works, not as a replacement for one that does not. That order matters, because buying a pad before cleaning the vents often hides the real problem for a few weeks and then leaves you with the same heat and a new accessory.

Choose a pad that matches your laptop, not just the biggest one on sale. The pad fans should line up with the intake grilles on the bottom of your laptop, and the pad should hold your laptop size securely without blocking the side or rear exhaust vents.

A pad with one large fan can suit a laptop with a central intake, while a pad with several smaller fans can suit a laptop with intakes spread across the bottom. A mesh top helps air pass through, and a slight tilt helps both airflow and viewing angle.

If the pad needs USB power, plug it into a wall charger or a powered hub rather than the laptop when you can, so the laptop is not powering its own cooling accessory from the same battery and charging circuit you are trying to keep cool.

Expect a modest gain, not a transformation. A well matched pad typically lowers temperatures by a few degrees and can delay throttling in a long session, especially on a laptop whose bottom intakes were starved on a flat desk. It rarely turns a throttling laptop into a cool one on its own.

Judge it the same way you judge every other fix: run the same game for the same length of time, note temperatures and fan behaviour, and keep the pad only if the improvement is real.

Vacuum coolers that clip onto a side exhaust are a different product, and they suit only certain vent designs, so check your model and the cooler instructions before buying one. Never block an exhaust vent with a cooler that does not fit it.

Step 4: Pick the Right Fan Profile in Your Maker App

Your maker app controls the fans more directly than Windows alone, and it is the right place to look when airflow and cleaning have helped but long sessions still run hot. The names differ by brand, but the idea is the same. A Quiet or Silent profile keeps fan noise low and accepts higher temperatures.

A Balanced profile trades a little noise for steadier cooling. A Performance or Turbo profile runs the fans harder and lets the processor and graphics chip hold higher speeds for longer.

MSI Center, for example, lets owners choose a fan mode and a Cooler Boost setting that forces maximum fan speed, while Lenovo Vantage offers thermal modes including a Performance mode for Legion laptops, and ASUS Armoury Crate offers granular fan and thermal control for ROG and TUF models.

For gaming, start with Balanced or Performance, not Silent. Silent mode is for light work, video playback, and quiet rooms, not for a demanding game. If you use Performance or Turbo, expect more fan noise. That noise is not a fault. It is the fans doing the job you asked them to do.

If you use Silent mode during a game and the laptop throttles, that is not a cooling failure either. It is the profile you chose limiting the fans. Switch profiles and test again with the same game before you conclude that the hardware is at fault.

Some maker apps also offer a custom fan curve, which sets fan speed at different temperatures. A gentle curve that rises early, rather than staying quiet until the laptop is already very hot, often gives smoother temperatures and less sudden fan noise. Keep changes modest.

Setting fans to full speed all the time wears them faster and makes the laptop unpleasant to use, while a curve that keeps fans too low for too long lets heat build up before the fans respond.

Save one profile for gaming and one for everyday work, and switch between them rather than leaving a single extreme setting on all day. If your maker app is missing, download it only from the maker website or the Microsoft Store, never from a random download site, and update it before you blame the hardware.

Step 5: Cut the Heat the Game Itself Creates

The fastest software fix after airflow is to ask the game to do a little less work.

A game running at an uncapped frame rate on maximum settings will push the processor and graphics chip as hard as they can go, even when the extra frames bring no visible benefit on a 60 hertz or 144 hertz display.

Capping the frame rate to match your display, or to a level that still feels smooth, is often the single biggest temperature drop you can get from settings alone. In most games you will find the cap under Display, Graphics, or Video settings, sometimes labelled Max FPS, Frame Rate Limit, or VSync.

VSync can also cap the frame rate, but it can add input lag, so a plain frame rate cap is usually the cleaner choice for competitive games.

Lower the settings that cost the most heat for the least visible gain. Shadows, reflections, ambient occlusion, and render resolution are common examples, but the exact list depends on the game. Try dropping one demanding setting at a time, from Ultra or High to Medium, and watch temperatures and frame rates together.

If a single change drops temperatures by several degrees with no visible loss in quality at your normal viewing distance, keep it. If a change makes the game look noticeably worse with no temperature benefit, undo it.

Resolution matters too: running a game at a lower render resolution, or using an upscaling option such as DLSS or FSR where the game offers it, can cut graphics load sharply, but only use the upscaler the game itself provides and only if the image still looks acceptable to you.

Windows settings help as well. On Windows 11, go to Settings, then System, then Power and battery, and check the Power mode. Microsoft describes three modes: Best power efficiency, Balanced, and Best performance, selectable separately for plugged in and on battery use.

For gaming while plugged in, Balanced or Best performance is reasonable, but Best performance keeps the processor ready for instant speed and can make the laptop run warmer, so it is not automatically the best choice for a long session. For light work, switch back to Balanced.

Also check the graphics preference for your game in Settings, then System, then Display, then Graphics, and make sure a demanding game is set to High performance so it uses the dedicated graphics chip as intended, rather than falling back to integrated graphics and struggling.

Close the extra work running alongside the game. A browser with dozens of tabs, a video call, a cloud backup, an antivirus scan, and a game update can all run at once, and together they keep the processor busy even before the game starts.

On Windows, press Ctrl plus Shift plus Esc to open Task Manager, click the CPU column, and look for anything using a large share of processor time while it should be idle. Close what you do not need, one app at a time, and watch the fan.

If closing one app drops fan noise within a minute or two, you have found a contributor. Also check startup apps in Task Manager, because many programs add themselves to startup and then sit in the background all day. You do not need to remove them.

Disabling their auto start means they only run when you open them. If a game still stutters after a clean restart, a fresh driver install is worth trying, but that is a separate step from simply rebooting, which is covered in our guide on how to reboot a laptop properly.

Step 6: Keep Drivers, BIOS, and Windows Updated

Outdated drivers and firmware can cause heat in ways that look like a hardware fault. A graphics driver bug can keep the graphics chip busy, a chipset driver can mishandle power states, and an old BIOS can run the fans on a poor curve.

Makers release updates that improve thermal behaviour, and MSI support guidance lists updating the BIOS and running Windows Update among its overheating troubleshooting steps, alongside fan modes and ventilation checks. That does not mean every update is urgent, but it does mean you should not troubleshoot heat for weeks on drivers that are years old.

Get updates from the right place. Use Windows Update for Windows itself, your graphics chip maker app or website for graphics drivers, and your laptop maker support page or maker app for BIOS, chipset, and thermal updates. Download maker tools only from the maker or the Microsoft Store.

Before a BIOS update, plug the laptop into mains power, close other apps, save your work, and do not interrupt the update. A failed BIOS update can stop a laptop from starting, so treat it as a careful job, not a casual click.

If a BIOS update is offered only as an optional fix for a problem you do not have, read its notes first and skip it if it does not apply to your model.

After updates, test with the same game and the same settings as before, so you can tell whether the update helped. If heat started right after an update, the update itself may be the cause.

In that case, check the maker support page for a newer fix, roll back the graphics driver through Device Manager if the maker advises it, and avoid changing several settings at once while you test.

Changing airflow, fan profile, game settings, and drivers all in one go makes it impossible to know which change helped, and it makes the next problem harder to trace.

Step 7: Play Plugged In, With the Right Adapter

A gaming laptop needs its full power to game well, and that power normally comes from the wall, not the battery.

The battery alone cannot sustain the full wattage of a high performance processor and graphics chip for long, so gaming on battery usually means lower performance, and it also heats the battery while it discharges hard. For a long session, play plugged in.

That advice is about performance and battery health together, not about fear of overcharging. Modern laptops stop charging when the battery is full and run from the adapter, so leaving the charger plugged in does not overcharge the battery in the way older advice claimed.

Use the adapter that came with the laptop, or an exact maker replacement with the same wattage and connector. An underpowered adapter can overheat, throttle performance, or fail to keep up with the laptop under load, and a cheap unbranded adapter is a fire risk as well as a performance problem.

Check that the adapter brick itself has airflow and is not buried under bedding or inside a closed bag while gaming, because a hot adapter in a hot room adds heat to the whole setup.

If the adapter is very hot to touch, smells of burning, or makes a buzzing sound, stop using it and replace it through the maker.

Many maker apps offer a battery charge limit, often around 80 percent, for laptops that spend most of their lives plugged in.

If your maker offers that setting, using it can reduce battery wear over months of desk use, and it also reduces the heat that comes from holding a battery at full charge while gaming.

It will not fix throttling on its own, and it is not a substitute for airflow and cleaning, but it is a sensible long term setting for a desk bound gaming laptop.

If your laptop gets very hot only while charging and gaming at the same time, try gaming with the charge limit on, or let the battery reach a comfortable charge level first, then game plugged in with the limit active.

Step 8: Know When Heat Means Repair, Not Another Setting

Some heat problems are not settings problems. If you have restored airflow, cleaned the vents, tried a sensible fan profile, capped the frame rate, closed background apps, and updated drivers, and the laptop still throttles, shuts down, or runs far hotter than it used to, the fault is probably inside the machine.

The most common internal causes are a dust mat packed onto the inner face of the heatsink fins, thermal paste that has dried out after years of service, a worn fan bearing, or a failing fan motor.

Outside cleaning cannot reach the inner fin mat, and no software setting can fix a fan that has stopped spinning.

Thermal paste and thermal pads sit between the processor, the graphics chip, and the heatsink, and they transfer heat from the chips to the cooling system. Over years of heating and cooling, paste can dry out and lose effectiveness, especially on a laptop that has gamed daily in a hot room.

Replacing it can restore cooling, but it means opening the case, removing the cooling assembly, cleaning old paste, and applying new paste correctly. That job can void a warranty on some models, and a mistake with a cable, a screw, or a heatsink mount can damage the laptop.

If the laptop is under warranty, or you are not confident about the cover, pay a service centre for the internal clean and paste check. A service visit is inexpensive compared with a cracked panel, a torn cable, or a damaged board.

If you do open the case yourself, follow the maker service manual for your exact model, work on a clean surface, keep screws organised, disconnect the battery first where the manual tells you to, and stop if anything resists.

Stop gaming on the laptop and get it checked promptly if you see any of these warning signs: repeated shutdowns during games, a burning smell, a battery that looks swollen or a trackpad or base that has lifted, a fan that grinds or never spins, or a system fan error at startup.

A swollen battery in particular is not a cooling setting problem. Do not puncture it, do not keep charging it, and take it to a service centre.

For general overheating that is not yet at that stage, our guide on how to stop your laptop from overheating works through the same fixes in a broader order, from free checks to hardware faults, and it is a useful second check if this gaming focused guide has not solved your problem.

Mistakes That Make a Gaming Laptop Hotter

A few common habits undo good cooling work. Gaming on a bed or a sofa is the biggest one, because it blocks the intakes that a gaming laptop depends on.

Using a cooling pad on top of a soft surface is the same mistake with extra hardware, because the pad fans still have to draw air through the blocked surface below.

Blocking the rear or side exhaust with papers, a sleeve, or a wall pushed tight against the laptop is another, because hot air that cannot leave is pulled straight back in.

Forcing the fans off, or setting a Silent profile for a demanding game and then wondering why the laptop throttles, is a settings mistake rather than a hardware fault. So is chasing maximum settings and an uncapped frame rate on a thin laptop and expecting desktop temperatures.

A thin gaming laptop trades cooling headroom for portability, and that trade is real. Accepting a frame rate cap and a Medium setting or two is not giving up.

It is matching the game to the machine you actually own, and it usually gives smoother, steadier play than a higher setting that throttles after ten minutes.

Finally, do not ignore a change. A laptop that was quiet when new and is now loud during the same games is telling you something has changed, usually dust, a background app, or a failing fan.

A laptop that suddenly shuts down, even once, deserves a check before the next long session, not a repeat of the same session in the hope that it was a one off. Early checks are free and quick. Late repairs are not.

Frequently Asked Questions

Is it normal for a gaming laptop to get hot while gaming?

Yes, warmth during a demanding game is normal, because the processor and graphics chip work hard and the case is small. What is not normal is throttling that drops frame rates mid game, repeated shutdowns, a painfully hot keyboard deck, or loud fans during light work. Check temperatures and fan behaviour together, restore airflow, clean the vents, and compare the laptop with how it behaved when it was new before you assume a fault.

What temperature should a gaming laptop run at?

There is no single safe number for every model, so check your own processor and graphics chip specifications. As a rough guide, many gaming laptops sit mainly in the 80s under load, with brief peaks higher, and Intel laptop processors often throttle near a junction maximum around 100 degrees Celsius. Worry most about sustained high temperatures combined with falling clock speeds, stuttering, or shutdowns, rather than a single brief spike.

Does a cooling pad really help a gaming laptop?

A well matched cooling pad can help by a few degrees, especially when it lines up with the bottom intakes and lifts the laptop off the desk. It works best after airflow and vent cleaning are sorted. It will not fix a failed fan, a heatsink packed with dust, or dried thermal paste, so do not buy one as a substitute for cleaning and checking the fan first.

Should I game on battery or plugged in?

Play plugged in for long sessions. The battery alone cannot sustain full gaming wattage for long, so performance usually drops on battery, and hard discharging also heats the battery. Use the original adapter or an exact maker replacement, keep the adapter ventilated, and consider a maker charge limit around 80 percent if your laptop spends most of its life on a desk.

How often should I clean a gaming laptop?

Check the vents monthly and clean them with canned compressed air every few months, or more often in a dusty home or a home with pets. Gaming laptops pull large volumes of air through bigger fans, so they clog faster than a light office laptop. If cleaning no longer helps, or the fan grinds or stops, the laptop needs an internal clean or a fan replacement rather than another outside clean.

The Verdict

Keeping a gaming laptop cool is mostly about giving its small cooling system a fair chance. Put it on a hard surface with clear vents, lift the rear slightly, clean the vents regularly, and use a fan profile that matches the work you are doing.

Cap the frame rate, lower the most demanding settings, close background apps, and keep drivers and firmware updated. Add a cooling pad only after those steps, and judge it by real temperatures and frame rates, not by how impressive it looks on the desk.

If those steps restore steady performance, you have solved a cooling problem, not just hidden it. If they do not, or if you see shutdowns, grinding fans, a burning smell, or a swollen battery, stop gaming on the laptop and get it serviced. A gaming laptop that throttles is protecting itself.

Listening to that warning early is what keeps it gaming well for years.

Similar Posts